Problem: getting in and out of a wetsuit can be a hassle sometimes, because the velcro closure on the ankle never stays open, when youtry to slide through the leg opening.
Solution: a small Velcro patch on the outside of the closure flap can quickly be fixed on the chin and keeps the leg open for easy entry or exit.

Problem: ion uses the strongest Velcro type available for all closures.The disadvantage is that the inside jersey on the collar often gets damaged by the neck Velcro closure.
Solution: the neck Velcro flap can easily be tucked away and fixed on the inside collar. This avoids damage on the wetsuit when it is not in use.

for perfect adjustment and sealing, all Velcro Closures on collar have a special shape and design with a Velcro that prevents unintentional opening by impacts, yet is easy to open and close with your fingers. Additionally the Quantum Series has the Velcro Closures on ankles and arms. The Jewel series provides the Velcro Closures on arms.

Application:
this seam technology is most commonly used for
thicker wetsuits from approx. 5 – 2 mm thick neoprene which
requires completely waterproof seams.
Gluing:
the edges of of the neoprenen panels are covered with a highly
adhesive , UV resistant contact glue, which needs to dry for a few minutes.
Then the glue is applied for a second time to make itmore sticky.
Assembling:
noe the corresponding parts of the neoprene edges are put together by hand and then firmly squeeed with an electric tool cm by cm to achieve high tearing strength.
Sewing:
after glueing the seams are stiched on the inside with a special blind-stitch sewing machine. A curved needle pokes through the neoprene layer and applied an elastic seam on the outside.
Pros:
by unsing this techniqu, the seam id highly tear proof, elastic and complete watertight and provides insulation and comfort.
Cons:
this manufacturing process id highly comlex and time consuming and therefore very expensive.

this shock absorbing neoprene type is used for the ION crash_padz to reach a maximum of protection in stress areas.

Problem: when you put on a wetsuit with batwing construction by yourself, the Water Gate back panel rolls up inside and makes it hard to grab it without help.
Solution: A Velcro patch on the upper part of the batwing makes it possible to fix the batwing on the neck closure.This prevents the Water Gate back panel from rolling up inside and helps you grabbing it without the help of an assisting buddy. The Velcro patches of the batwing and neck closure are now provided with a red label, so that you can easily see how to close it.

all ion wetsuits have protection panels on the knees with flex zones for bending.

all neoprene panels of ion Neo Shirts have a Meta_Lite Titanium coating on the inside for extraordinary wearing comfort and heat retention.

to improve mobility and comfort, all ion wetsuits now come with a contour cut. It enhances the flexibility in the collar, wrist, ellbow, instep and the hollow of the knee.

this new neoprene type is even softer and provides more stretch than the s_type neoprene. It’s the most elastic neoprene on the market and is used for double lined panels in the collar, arm, shoulder and armpit area in quantum, strike and jewel series.

ION wetsuits are all completely made of Sheico’s s_type neoprene which is one of the most elastic neoprene types on the market. It’s also very warm and lightweight due to its specific cell structure.

Problem: getting in and out of a wetsuit can be a hassle sometimes, because the velcro closure on the ankle never stays open, when you try to slide through the leg opening.
Solution: a small Velcro patch on the outside of the closure flap can quickly be fixed on the chin and keeps the leg open for easy entry or exit.

the Quantum, Strike and Jewel Series are provided with Crash_Padz on the shin to avoid injuries when crashing on the board edge or fin. Each Crash_Pad consists of 3mm K_Type Neoprene stitched on the inside. This harder neoprene absorbs any impact. Additionally the rib
area of the Strike Series is equipped with this feature protecting when crashing hard on the board or pressure of the harness.

Problem: ordinary back zipperpulls often slip out of your fingerswhen pulling upwards.
Solution: a simple but effective folded ending with a bar tack on the webbing makes the closing procedure more convenient.

Application:
this seam is commonly used for thinner wetsuits and
rashguards with a neoprene thickness of up to 2 – 3 mm which
do not require watertight seams.
Assembling:
the two pieces of neoprene panels are alinged along the edges and overlap each other approx. 5mm as they run through the flat lock sewing machine.
Sewing:
in contrast to the blind stitch, the needle punctures through the neoprene layers to the outside, so that the flat lock seam is visible on the outside.
Pros:
It is much faster and cheaper to produce a flat lock wetsuit. Nvertheless it is very strong and emphaizes the look of the panel layout.
Cons:
not completely waterproof; not suitable when heat retention is obligatory

all Lycra- and Neoprene tops have a fine webbing loop on the center of the hem for fixing the board shorts laces to prevent slipping up by impact.

this 3-layer neoprene is only used in the chest panel of quantum semidry 5/4 and is very popular in triathlon. The middle layer is perforated with many holes, which hold air to improve the heat retention.

all long-leg wetsuits aside from the Quantum Series are provided with the Detachable Velcro Leg Loops. If needed the loop avoids any intrusion of water by perfect adjustment. In the unlikely case that the loop releases on the water it can not get lost due to its unique construction.
Of course the Velcro Loop can be removed easily if not needed.

all wetsuits with WaterGates have little holes on the lower back part. Water which enters through the back zipper can leak out easily and keep the back area dry.

for all Quantum, Strike and Jewel Wetsuits we use reflective Titanium Glue in the torso panels for improved heat retention.

these holes are also in the calves which prevent the water from getting stuck in the legs like a bubble.

All Strike and Jewel LS wetsuits are equipped with rubber stripes at the wrists.The thighter and sealed fit avoids water rushing into your arms.

to distinguish the different lines and styles more easily all wetsuits are provided with visible neck logos giving information about the line, style and thickness of neoprene. Now there is a different logo for skin and double lined styles (indicated by DL).

all ion wetsuits have a solid YKK back zipper. The top ending is lower than usual, to provide maximum freedom of backwards movement of the head. There is NO additional small Velcro flap on the top end, because it causes annoying hassle when undressing. Instead the special
SealTite Velcro closure is designed to prevent unintended opening.

all ion Lycra Tops and Neoprene Tops are made of 8oz. SpanFlex UV Nylon Jersey with an extraordinary UPF rating 35 to 50+ (depending on the color).

on each ion wetsuit the logo is printed on the left chest side.

ion improved the batwing construction by applying a new tape on top of the seam for better water resistance.

crucial stress points are reinforced either with MelcoTape
on the inside or rubber logo patches on the outside.

the Quantum, Strike and Jewel Semidry 5/4 mm suits have an additional cuff extension on the batwing panel worn over the head for best waterproofness.

All ION Wetsuits are equipped with a double lined crotch panel, to avoid abrasion from leg straps of seat harnesses. All Quantum, Onyx, Strike and Jewel wetsuits thicker than 4,0 mm are equipped with a special hexagon coating to avoid windchill at the crotch area.

Premium brand TIZIP zipper to prevent any water leaking through the zipper.

Super flexible Latex Cuffs on neck, wrists and ankles to prevent water leaking into the dry suit.

Highly elastic liquid glue for 100% water sealing and bomb proof tearing strengh