|
– Dry - Tizip SuperSeal dry zipper and Seamtite Latex cuffs
– Warm - 4,0mm Neoprene and ION Hot Stuff jersey inside
– Elastic - Awsome wearing comfort due to flexible neoprene construction
– Safe - Neoprene construction keeps the rider above the water
– Fully Glued Blind-Stitch water sealing
– Additional Melco Seam Tape on critical areas
– Allover pin stripe design
– Inside pocket for key
– Hood with elastic drawcords on front face and back neck
– Drainholes for water release in hood
– Three cargo pockets
– Supra Tex reinforcement on the knees
The Fusion Drysuit 4/3 is a highly innovative new design concept for a drysuit created by ION. It combines the advantages of conventional snug fit Neoprene drysuits and baggy style Nylon fabric drysuits without the inherent weaknesses of these two concepts.
Key Features
Dry: Completely waterproof due to premium TIZIP® SuperSeal dryzipper, highly elastic SEAMTITE® Latex cuffs and fully glued blind-stitched seams with additional Melco seam tapes.
Warm: 4,0mm thick neoprene plus ION hot_stuff inside jersey for best heat retention possible in extremely icy conditions. Less extra thermal underwear is needed!
Elastic: Flexible Neoprene construction allows awesome wearing comfort and less bulky fit which prevents restriction of movement especially for swimming.
Save: As Neoprene floats on the water it helps you not to drown in an emergency situation. Even if there is a water leakage in the suit the Neoprene shell still provides some thermal insulation to save you.
FAQ (Frequently Asked Questions)
What is the concept of the Fusion Drysuit?
Introducing a highly innovative new design concept for a loose fit Neoprene drysuit overall created by ION.
It combines the advantages of a conventional snug fit Neoprene drysuits and a baggy style Nylon fabric drysuits, but without the inherent weaknesses of these two concepts: best of both worlds - read why!
What´s so good about the new Fusion Drysuit?
Warm: 4,0mm thick neoprene insulation plus ION hot_stuff inside jersey for best heat retention possible in extremely icy conditions. Much less extra thermal underwear is needed!
Elastic: Flexible Neoprene construction allows awesome wearing comfort and less bulky fit which prevents restriction of movement especially for swimming.
Dry: Completely waterproof due to premium TIZIP® SuperSeal dryzipper, highly elastic SEAMTITE® Latex cuffs and fully glued blind-stitched seams with additional seam tapes.
Safe: As Neoprene floats on the water it helps you not to drown in an emergency situation. Even if there is a water leakage in the suit the Neoprene shell still provides some thermal insulation to save you.
Why is the Fusion made of Neoprene?
Basically two reasons: First of all because Neoprene has superior heat retention properties compared to Nylon fabric. Second reason is the flexibility of Neoprene! Nylon does not stretch and therefore restricts the freedom of movement.
Our Fusion Drysuit fits less bulky than a baggy Nylon suit, but more loose fit compared to a conventional snug-fit Neoprene wetsuit. Therefore you feel completely unrestricted in any way. Dressing up is super convenient and actually it feels much more like wearing a comfortable work-overall rather than a tight wetsuit!
Is the Fusion really so much warmer?
Yes, you bet! The all new ION Fusion Drysuit will probably be the warmest suit you will ever wear in your life, providing you grease and close the zipper properly and use functional quick-drying underwear underneath.
We found out that wearing the Fusion, your body saves so much extra heat for the extremities, that you will feel surprisingly warm in your hands, feet and head. No more deep-frozen fingers barely able to grab anything like a bar or boom and feeling nothing but pain.
Also compare the Fusion with a Nylon suit when you are actually swimming in freezing cold water for a while. The thick layer of 4,0mm Neoprene insulation always keeps the water in a save distance to your skin to reduce heat loss by convection. Now compare it to the thin layer of Nylon and you understand why you instandly feel the cold creeping into your body!
What do I wear under the drysuit?
Always wear functional first-layer underwear such as ION Thermo Tops and ION Boxer Shorts made of quick drying antibacterial BiPolyPropylene. Even though you will sweat it will keep your skin feel pretty dry and comfortable.
Additional thermal fleece garment provides extra warmth if needed. Avoid naked skin or cotton underwear, because it only sucks up the sweat and makes your skin freeze.
Why is the Fusion Drysuit heavier than Nylon drysuits
Damn right, the Fusion is heavier than a Nylon suit - thats because it is completely made of highly insulating Neoprene plus super warm ION Hot_Stuff jersey inside. It also includes useful pockets and a smart hood. But this new concept offers so much more warmth in comparison, which a conventional Nylon suit never can achieve.
Remember, the thin Nylon shell basically does not provide any heat retention - you always have to wear very thick thermo insulation underneath (plus a stupid looking hood) to keep you warm at all. Add it all up and you find out, all the stuff is not much lighter and you are still freezing.
Also do not judge the weight only by holding it up with your arm! Try it on and you´ll find out, it does not feel heavy at all once you wear it - even on the water when it is wet!
Why must I put grease on the dryzipper?
Lubrication is super essential for proper coupling of the chain when opening or closing the zipper! It makes it slide much easier all the way to the end of the zipper-garage and prevents the zipper-chains from snapping apart.
So always invest a few seconds before using the drysuit and take the little grease tube delivered with the drysuit (or any other acid free grease or oil) to lubricate the zipper properly. Just think of other situations in life, where lubrication is essential for success...
What can I do when the zipper did come apart?
Well, normally this can only happen, when the zipper was not greased properly or abused in a way it shouldn´t. Always use lubrication and do not apply too much force or pull it in a wrong direction! Always let someone help you closing and opening the zipper smoothly along the line, then you are fine!
If it does snap apart though, do not freak out - normally the zipper can be fully fixed with moderate force as it is descibed on the zipper manual or on the www.tizip.com website!
How do I use the Latex cuffs?
The Latex cuffs on the neck, wrists and feet are highly elastic seals to prevent any water to leak in. They are very thin and sensitive so treat them with care! When sliding through the cuffs, avoid sharp fingernails and exessive force.
First slide through the ankle cuffs, then second the wrists before sticking your head through the neck cuff. It works surprisingly easy when your right hand pulls on the center backside of the neck, while your left hand grabs from the frontside and pulls open the Latex cuff downwards when your face slips through!
When storing the drysuit for longer time, please put some Talcum powder on all Latex cuffs for conservation to keep them smooth and elastic. In case of damaged Neoprene or ripped Latex cuff please contact a professional surf- or divingshop specialized on Neoprene repair service.
Can I cut the Latex cuffs to adjust my neck size?
Yes, very simple! The Latex cuffs come in a pretty tight dimension. To ensure perfect waterproofness and wearing comfort please customize the Latex cuff opening to the size of your neck. It must be fairly tight to be waterproof, but should not choke when breathing.
Simply fold the cuff flat and hold it without too much tension with two hands. A second person should use sharp scissors to trim the cuff along the small ribs. Attention: try out the fit in small steps, so it is not too loose!
How do I use the hood?
Most of the body heat is lost on your head - that´s why the Fusion has a smart hood, which you can wear on the beach and even riding on the water! It also works in combination with an additional ION Neo Beanie or Neo Hood.
Simply put it over your head and pull the front elastic cord to seal your face. Then pull on the elastic drawcord on the back of your head to adjust the tension. It will keep the hood wrapped tightly around your head and keep your eyesight open while turning your head to left and right!
If you don´t like wearing the hood, you can simply fold the top part into the hood and use it as a large wind shield stand-up collar on the back of your neck.
There are several holes cut into the hood for water release after submerging.
What safety precautions must I follow?
Riding in icy conditions can provoke life-threatening situations! You ride at your own risk, so know what you are doing and never risk your life or others!
Always release the trapped air inside the drysuit before riding! Submerge complete body in the water and open the neck cuff slightly to avoid flipping over with your legs floating up over your body!
How do I care for the suit in general?
Please check general care instructions on the inside of the suit. Always rinse it with fresh water and turn inside out for complete drying after use. This will avoid smelly odor from little botanical biotopes growing in your suit! Never expose to sunlight to dry the suit - this will damage the Neoprene and Latex cuffs most severely!
When storing the drysuit for longer time, please put some Talcum powder on all Latex cuffs for conservation to keep them smooth and elastic. Store it in a dry place without sunlight hanging on a broad hanger.
|
