The moulded X-Shape at the back of the harness guarantees a maximum amount of protection, while giving the freedom to land all kinds of tricks.

Normally the webbing belt ends somewhere behind the buckle. We found that a continous webbing belt along the back of the harness spreads the load much better. This guarantees better force distribution around the back of the harness.

The foam, used for the inside constructinon has two desities. The soft foam was used in the center part of the seat harness, where good fit is essential. The solid foam applies where protection comes first.

Flexible waist belt with rubber endings to ensure tight and comfortable fit.

The push button supports the quick assembly of the harness. There is no need to mount any velcro tapes through buckels. Just hook the metal ring into the spreader, adjust the webbing and off you go.

This is a solid neoprene padded plate that keeps away the harness hook from your body. Especially when the spreader bar moves up quickly.

The overall shape in the horizontal direction supports perfect fit along the backbone while providing more than enough freedom to land your moves.

The flexible area at the lower back of the seatharness guarantees perfect adjustment onto the lower back of the body.

Horizontal structure in the inner foampart provides the harness to ride up under tension.

Flexible cutouts in waistharnesses to provide a maximum on flexibility in the backpart of the harness.

Safety knife to cut the kitelines in dangerous situations.

The double layer foam padding protects your bones and all other vulnerable parts in this area.Especially if the body is bend sideways.

The inner part of the harness is made up of different segments to ensure, that the harness fits perfecty along the backbone. Less pain - More fun.

Segmented zone shape in all directions supports your backbone and reduces the chance that the harness will slip upwards when you hit the water.

A small metal ring on a rubber coated hande lets the leash slide along the back of the harness, making hanlde pass tricks easier.

The belt garage keeps any end of the webbing band from flying aroung.

Neoprene padded flexible leg straps, which adjsust themselves onto the shape of the riders legs. The seat harness will fit perfecly and it won‘t tension your legs too much.

Flexible handle at the back of the harness, so your buddy can grab you while another launches your kite.

The strap construction prevents the spreader bar from rushing upwards in overpowered situations. Two
webbing straps run from the bungee belt to the spreader bar to make sure that the kiter doesn‘t get hurt.

New shape technique which provides a perfect fit to the upper and lower part of the back with the help of different segmented shaped areas in the harness body.

High backpart cut of the harness to provide a maximum of support for the lower and upper back.

Preshaped harness construction which makes the harness automatically wrap arround the body.

New foam specification; creates perfect ergonomical fit by adapting to the shape of your body.